The remote may not work temporarily due to poor contact of the battery or static electricity. Make sure none of the remote buttons are jammed.NOTE: Because each of these steps represents a possible solution, check the function of the remote control after completing each step. If you cannot operate after confirming the above, service may be required.Ĭhecking items of the remote control (common) When a specific device is connected and the TV flashes, there is a possibility there is a problem with the connected device.If connections are complicated, take note of them, and make sure you can reassemble them before removing.Remove connected devices (external USB hard disk, HDMI connection device, etc.) and cables from the TV terminal. Remove external devices to confirm whether there aren't influences of external devices.
#Sony tv remote buttons explained how to
#Sony tv remote buttons explained android
For how to reset Android TV, refer to: How to reset an Android TV?.If it caused by an external factor, such as network service/data broadcasting/connected device, it may be improved by resetting your TV. If there is no issue with the above connection, proceed to Step 3. If the lamp is not on, check whether or not the power cable or AC adaptor is not disconnected or loose.If the lamp is lit or is blinking in red, proceed to Step 3.The lamp on the diagram to the right is an example. NOTE: Depending on the model, the name, position, and shape Check that the lamp (power lamp/standby lamp) on the front/bottom of the TV is on.NOTE: Depending on the model, the positions of TV buttons vary.Ĭheck the sides, back, front, and top of your TV. If TV buttons cannot be operated, proceed to Step2.If TV buttons can be operated, proceed to Section B: Checking items of the remote control.Section E: Checking items of the wireless remote controlĬheck whether or not the TV is in operation.Section D: Checking items of the infrared remote control.Section C: Select remote control type (common).Section B: Checking items of the remote control (common).Section A: Check whether or not the TV is in operation.If the problem is due to the remote control, you will be guided in Section by remote control type. First, check whether the problem is due to the TV or the remote control. This article is composed of the following items. If the issue continues, we advise you to go through each section in the article using our complete troubleshooting guide. Then, reinsert the batteries again according to the polarity (-/+). Please wait a couple of minutes before trying one of the buttons again.NOTE: The affected buttons are listed below.Remote control buttons:īefore trying any of the troubleshooting steps below, we recommend that you remove the batteries from the remote for approximately 1 minute. Sony's Android TV will not respond to certain remote control buttons for 1-2 minutes after doing a reboot.
0 kommentar(er)
